NW
50 2"
 |
NW
62 2 1/2"
 |
NW 75 3"
 |
Industrial water
filters are made of high-quality synthetic materials
and offer connection options from 2" to
3" and yields from 15,000 to 50,000 litres
per hour with very low load losses. |
| Fitted with
a 25 micron filtering sieve, two pressure
gauges and a purging valve as standard issue.
A stainless steel clamp collar with an O-ring
ensures that the filter is closed and air-tight.
The bayonet system ensures that the hood is
kept in place during opening and closing of
the filter. |
 |
Filter refills:
The system of interchangeable and disposable bags
offers filtering finenesses of 5, 10, 25, 50 and
100 micron; 150 and 300 micron nylon bags (washable)
are also available.
Optional
extras :
Brass connections fitted with O-rings are available
separately and permit easy filter placement/dismounting. |
 |
Technical
characteristics :
- Filtering finenesses: 5, 10, 25, 50, 100 micron
(standard bags)
- 150 and 300 micron available in nylon (washable
and reusable)
- Maximum temperature: 50° continuous
- Maximum usage pressure (bursting pressure 30 bar):
15 bar
- Initial load loss: ± 0.4 bar depending
on types and yields
- Average yields for Ð
P 0.2 bar (filtering fabric 25 micron)
Two pressure gauges 0-20 bar indicate
the load loos at all times.
The entry/exit bags are threaded for screwing of
metallic connections.
The entry/exit holes of the head are threaded (thread
suitable for gas) for all types of connections.
Measurements
:
| Cintropur®
filters are made of high-quality synthetic material
and are suitable for foodstuffs and drinking
water |
| Head: |
polypropylene reinforced
with glass fibre |
| Hood: |
acrylonitrile
styrene – transparent and shock-resistant |
| Centrifugal
propeller and fastening cover: |
polyethylene |
| Filter
bags: |
synthetic non-woven,
non-felt fibres |
| O-rings: |
Butadiene-nitrile
rubber |
| Clamp
collar: |
Stainless steel |
Load
losses :
Download
the file on load loss (PDF format)
Top
